Public Pricelist
  1. All Products
  2. PumpAlarm
  3. Cellular Floor Water Detector Kit

Cellular Floor Water Detector Kit

https://www.pumpalarm.com/web/image/product.template/25/image_1920?unique=f614257
(0 review)

PumpAlarm Unit + Floor Water Sensor
The floor water detector kit is great for notifying you of water in unwanted place. Do not let water damage ruin your basement, let us bring you peace of mind. Our floor water sensor will detect water and send you a notification immediately.

$ 281.00 281.0 USD $ 281.00

$ 281.00

Not Available For Sale

This combination does not exist.

Contact Us

Terms and Conditions
30-day money-back guarantee

If you are experiencing water in unwanted places, the floor water detector kit is the right kit for you! The floor water sensor can be placed on a drain, under a washing machine, under a faucet or anywhere there is water where it is not supposed to be. The PumpAlarm can notify up to 3 mobile devices, so you can react before damage occurs.

What's Included:

  • 1 - Cellular Alarm Unit
  • 1 - Floor Water Sensor 
  • 4 - AA Batteries
  • 4 - Mounting Straps
  • 2 - Hose Clamps
  • 3 - Mount Screws & Plastic Anchors
  • 1 - Quick Start Installation Guide
  • 1 Year Warranty

If you are experiencing water in unwanted places, the floor water detector kit is the right kit for you! The floor water sensor can be placed on a drain, under a washing machine, under a faucet or anywhere there is water where it is not supposed to be. The PumpAlarm can notify up to 3 mobile devices, so you can react before damage occurs.

What's Included:

1 - Cellular Alarm Unit
1 - Floor Water Sensor 
4 - AA Batteries
4 - Mounting Straps
2 - Hose Clamps
3 - Mount Screws & Plastic Anchors
1 - Quick Start Installation Guide
1 Year Warranty

All PumpAlarm devices, including the PumpAlarm, require users to enroll in an annual  subscription service to connect to the cellular network in order to properly monitor your investment. Configured completely using your cell phone! No need for apps or additional software. Instructions to activate your device and enroll in the corresponding Unit Payment Plan for either your PumpAlarm or TextLight are included in the manual, as well as on the PumpAlarm website. The annual fee for the Cellular Water Alarm is $49.99. This covers the real-time text messaging capability of the device. Service can be unsubscribed at any time.

  • Dimensions: 6.7” W x 4.9” H x 1.9” D
  • Weight: 2.77 lbs
  • Operating Temperature: Varies based on battery chemistry and manufacturer.
  • Typical Alkaline Batteries: 0 degrees F to 120 degrees F
  • Typical Lithium Batteries: -30 degrees F to 140 degrees F
  • Operating Humidity: 0-90% RH, non-condensing
  • Cellular Radio: 4G LTE CAT-1
  • Certifications: FCC Parts 15, 22, 24; RoHS compliant; IC: RSS-132 & 133
  • Antenna: Factory supplied 4G/LTE paddle antenna
  • Input Voltage: 110VAC +/- 20%
  • Input Current: 0.1 A (max)
  • Backup Batteries: Non-rechargeable, AA size, Requires 4 batteries
  • Sounder: 2.9 kHz +/- 500 Hz, 100 dBA
  • On Board Temperature Sensor: -30 degrees F to 140 degrees F, +/- 5% accuracy
  • Sensor Inputs: (4) Conductivity sensing or contact closure. Safe to touch.
  • User Interface: (1) on/off power and mute capacitive touch button, (1) push to test capacitive touch button, (1) Status LED, (1) Low battery LED, (1) Temperature Alarm LED, (4) Input alarm LEDs
  • Enclosure: NEMA 1 for indoor, basement, or crawlspace. Not recommended for outdoor use.

Power Monitoring

Sends messages when the power goes out and when it returns.

Temperature Monitoring

Monitor for both high and low temperature conditions. Adjustable upper and lower alarm levels.

Water Level Monitoring

Our float switch triggers when water reaches a specific point. It can be programmed to detect high or low levels. 

Floor Water Detection

When the digital water sensor detects 3/16" of water PumpAlarm will notify you.

Instant Alerts

Quick detection and reliable connection help send alerts in real-time directly to your phone.

DIY Install

You can install this device if you have a screwdriver and can send a text message!

Activation Steps

Activate

Go to pumpalarm.com/activate or click "Manage Subscription" in the navigation bar above.

Sign In

Login to your existing account or create a new account if you don't have one.

Enter Unit ID

Enter your Unit ID that comes standard. Your Unit ID can be found on a label atop of your device. For some models, your Unit ID will be found inside the cover. Contact Support if you have questions. 

Payment Plan

Select the corresponding Unit Payment Plan for either PumpAlarm or TextLight. Review your payment summary. 

Continue Setup and Use

You will receive two emails from support@pumpalarm.com within the next fifteen minutes. First email contains your transaction details. Second email contains activation details, including your unit phone number. Save your unit's phone number as a contact in your phone to reference during setup and use.