• Alarms
  • Kits
  • PumpAlarm
  • TextLight
TextLight Water Flow Monitoring Kit
120V cellular alarm unit paired with a water flow switch to alert you in the event of flow or no-flow conditions for water flow applications.
469.00 469.0 USD
TextLight Wastewater Level Monitoring Kit
120V cellular alarm unit paired with a wastewater float switch to alert you of high-level or low-level conditions within wet wells or open water tanks.
489.00 489.0 USD
TextLight Tank Level Monitoring Kit
120V cellular alarm unit paired with an industrial grade tank level switch for providing insights into the levels of non-caustic liquids.
449.00 449.0 USD
TextLight Electrical Current Monitoring Kit
120V cellular alarm unit paired with a current switch to indicate the presence or absence of operating current.
469.00 469.0 USD
TextLight Air Pressure Monitoring Kit
120V cellular alarm light paired with an air pressure switch that is designed to easily attach to your existing system.
469.00 469.0 USD
TextLight Temperature Monitoring Kit
The TextLight Temperature Monitoring Kit is a versatile solution for monitoring both high or low-temperature conditions across commercial, industrial, and private settings. 120V cellular alarm light paired with a temperature switch.
449.00 449.0 USD
TextLight - 120V
120V cellular alarm light with two inputs. The TextLight will send you alerts notifying you of power loss and high-water level. Equipped with a backup battery that runs for 12+ hours in the event of a power loss. Rated for indoor and outdoor use. Annual cellular subscription required - $75.00/year.
349.00 349.0 USD
Mechanical Room Worry-Free Alarm Kit
PumpAlarm Unit + 15 ft. Micro Float + Floor Water Sensor
The Mechanical Room Worry-Free Alarm Kit brings you peace of mind when it comes to full basement protection. The micro float and floor water sensor provide you with the full solution to keep your basement dry.
296.00 296.0 USD
Floor Water Detector Kit
PumpAlarm Unit + Floor Water Sensor
The floor water detector kit is great for notifying you of water in unwanted place. Do not let water damage ruin your basement, let us bring you peace of mind. Our floor water sensor will detect water and send you a notification immediately.
281.00 281.0 USD
Sump Pump Alarm Kit
PumpAlarm Unit + 15 ft. Micro Float
The Sump Pump Alarm Kit will protect you against water damage. The micro float switch will alert you of a high-water level, so you have time to react.
283.00 283.0 USD
Sewage Ejector Alarm Kit
PumpAlarm + Sewage Float
The sewage ejector alarm kit comes with a robust float switch to monitor the level in your basin, so no overflows happen without you knowing.
296.00 296.0 USD
Contractor's Versatile Solution Bundle
5 PumpAlarm Units + 3 Dual Floats + 3 15 ft. Micro Floats + 3 Floor Water Sensors + 3 Input Splitters + 3 Input Doublers
The contractor's versatile solution bundle is the perfect all in one solution for your needs. This bundle comes with all of our sensors and cables that allow you to hook up your own sensors.
1,500.00 1500.0 USD
Rugged Basin Dual Float Switch
This rugged dual float switch is designed to be used primarily in residential, commercial and rental unit sump pump basins to alert the property owner of an excessively high water level before water spills out of the basin and onto the basement floor. Must be installed inside the basin above the normal water operating level, and can be quickly strapped to your sump pump discharge pipe.
28.00 28.0 USD
Extension Antenna - Threaded Connector - New
Use the extension antenna when you have a weak cellular signal, and the signal needs to be improved. Our extension antenna is mounted remotely from the cellular transmitter using the supplied extension coaxial cable and has been designed to provide cost-effective coverage for you. It’s designed for wall, pipe, or mast mounting and is weatherproof, allowing the device to reap the benefits of an antenna mounted in an elevated location where the signal is strongest.
75.00 75.0 USD
Rugged Sewer Ejector Pit Float Switch
The rugged sewage ejector pit switch is designed to be used primarily in residential, commercial, and rental unit sewage ejector pump basins to alert the property owner of an excessively high black water level before water spills out of the basin and onto the basement floor. 6' cable length that plugs into input #3 & #4 on the PumpAlarm Unit.
36.00 36.0 USD
Floor Water Sensor
The floor water sensor is a conductivity sensing device that can detect when water bridges the gap between the two stainless steel tabs on the sensor. Lay it on the floor in a mechanical room in commercial, residential, and rental applications to get early notification of a leaking hot water heater, leaking pipe, overflowing pit, or any other device which could leak and cause water damage. Typical applications include floors, under refrigerators, cabinets, drain pans, weep holes, and aquariums.
18.00 18.0 USD
Micro Float Switch - 15 ft.
The micro float switch is great for applications where you desire to know of a high water level condition in a small tank or sump pump basin, in commercial, residential, and rental applications, and there is not water splashing or vibration present. Typical applications include sump pits, weep holes, aquariums, and bilge pump monitoring for boats.
20.00 20.0 USD
Micro Float Switch - 30 ft.
The micro float switch is great for applications where you desire to know of a high water level condition in a small tank or sump pump basin, in commercial, residential, and rental applications, and there is not splashing water or vibration present. For more turbulent water applications, use our rugged dual float switch. Typical applications include sump pits, weep holes, aquariums, and bilge pump monitoring for boats. This product is identical to our other micro float, but has a longer cable for applications requiring the sensor to be mounted remote from the cellular transmitter.
30.00 30.0 USD
Input Doubler– Input #1 or #2
With our 2-device doubler cable, you can double up your PumpAlarm sensors in device inputs 1 and/or input 2 allowing you to plug 2 PumpAlarm sensors into one input. The male end of the splitter connects to the device and then has two female connectors to accept two PumpAlarm accessory devices, or cables, with the mating connectors.
20.00 20.0 USD
15' Input Adapter Cable - Use Your Own Sensor
Our reliable 15' Input Cable can be used to add your own normally open/closed unpowered, dry contact sensors.
20.00 20.0 USD
Adapter Cable - Input #3 and #4 Doubler
This 3-pin splitter can be used to convert inputs 3 and 4 into two, individually wired 2-pin inputs. Great for situations where you want to use a float switch and water detector together to monitor for water and have another use for inputs 1 and 2 for other sensors and/or detectors.
20.00 20.0 USD
Cellular Sump Pump Alarm
With Real-Time Alerts for water, temperature, power loss, and low battery. No Sensors Included. Pair with one, or more, of our sensors using the 4 available inputs. Rated for indoor use. Annual cellular service is just $49.99/year.
265.00 265.0 USD
TextLight - 12V
12V cellular alarm light with two inputs. The TextLight will send you alerts notifying you of power loss and high-water level. Equipped with a backup battery that runs for 12+ hours in the event of a power loss. Annual cellular subscription required - $75.00/year.
349.00 349.0 USD
Extension Antenna - Snap-in Connector - Legacy
Our extension antenna has been designed to provide cost-effective coverage for your PumpAlarm.com 4G device. It’s designed for wall or mast mounting and is weatherproof, allowing the device to reap the benefits of an antenna mounted in an elevated or external location where the signal is strongest. This extension antenna is only compatible with devices ordered prior to October 16th, 2022. We have changed the antenna connector on devices and this item is not compatible with devices ordered after October 16th, 2022. If you have any questions, please contact our support at 888-454-5051.
75.00 75.0 USD
I-Level - Submersible Level Transducer
Ensure maximum safety and precision with our 60ft Explosion-Proof Submersible Level Probe. 2-wire, 4-20mA, loop powered I-Level works with any PLC or control system. Perfect for deep wells and tanks, this robust probe provides reliable level measurements, protecting your pump system from overflows and dry runs.
349.00 349.0 USD