With Real-Time Alerts for water, temperature, power loss, and low battery. No Sensors Included. Pair with one, or more, of our sensors using the 4 available inputs. Rated for indoor use. Annual cellular service is just $49.99/year.

120V cellular alarm light with two inputs. The TextLight will send you alerts notifying you of power loss and high-water level. Equipped with a backup battery that runs for 12+ hours in the event of a power loss. Rated for indoor and outdoor use. Annual cellular subscription required - $75.00/year.

PumpAlarm Unit + Floor Water Sensor
The floor water detector kit is great for notifying you of water in unwanted place. Do not let water damage ruin your basement, let us bring you peace of mind. Our floor water sensor will detect water and send you a notification immediately.

PumpAlarm + Sewage Float
The sewage ejector alarm kit comes with a robust float switch to monitor the level in your basin, so no overflows happen without you knowing.

PumpAlarm Unit + 15 ft. Micro Float
The Sump Pump Alarm Kit will protect you against water damage. The micro float switch will alert you of a high-water level, so you have time to react.

PumpAlarm Unit + 15 ft. Micro Float + Floor Water Sensor
The Mechanical Room Worry-Free Alarm Kit brings you peace of mind when it comes to full basement protection. The micro float and floor water sensor provide you with the full solution to keep your basement dry.

5 PumpAlarm Units + 3 Dual Floats + 3 15 ft. Micro Floats + 3 Floor Water Sensors + 3 Input Splitters + 3 Input Doublers
The contractor's versatile solution bundle is the perfect all in one solution for your needs. This bundle comes with all of our sensors and cables that allow you to hook up your own sensors.

This 3-pin splitter can be used to convert inputs 3 and 4 into two, individually wired 2-pin inputs. Great for situations where you want to use a float switch and water detector together to monitor for water and have another use for inputs 1 and 2 for other sensors and/or detectors.

Our reliable 15' Input Cable can be used to add your own normally open/closed unpowered, dry contact sensors.

Use the extension antenna when you have a weak cellular signal, and the signal needs to be improved. Our extension antenna is mounted remotely from the cellular transmitter using the supplied extension coaxial cable and has been designed to provide cost-effective coverage for you. It’s designed for wall, pipe, or mast mounting and is weatherproof, allowing the device to reap the benefits of an antenna mounted in an elevated location where the signal is strongest.

The floor water sensor is a conductivity sensing device that can detect when water bridges the gap between the two stainless steel tabs on the sensor. Lay it on the floor in a mechanical room in commercial, residential, and rental applications to get early notification of a leaking hot water heater, leaking pipe, overflowing pit, or any other device which could leak and cause water damage. Typical applications include floors, under refrigerators, cabinets, drain pans, weep holes, and aquariums.

Ensure maximum safety and precision with our 60ft Explosion-Proof Submersible Level Probe. 2-wire, 4-20mA, loop powered I-Level works with any PLC or control system. Perfect for deep wells and tanks, this robust probe provides reliable level measurements, protecting your pump system from overflows and dry runs.

With our 2-device doubler cable, you can double up your PumpAlarm sensors in device inputs 1 and/or input 2 allowing you to plug 2 PumpAlarm sensors into one input. The male end of the splitter connects to the device and then has two female connectors to accept two PumpAlarm accessory devices, or cables, with the mating connectors.

The micro float switch is great for applications where you desire to know of a high water level condition in a small tank or sump pump basin, in commercial, residential, and rental applications, and there is not water splashing or vibration present. Typical applications include sump pits, weep holes, aquariums, and bilge pump monitoring for boats.

The micro float switch is great for applications where you desire to know of a high water level condition in a small tank or sump pump basin, in commercial, residential, and rental applications, and there is not splashing water or vibration present. For more turbulent water applications, use our rugged dual float switch. Typical applications include sump pits, weep holes, aquariums, and bilge pump monitoring for boats. This product is identical to our other micro float, but has a longer cable for applications requiring the sensor to be mounted remote from the cellular transmitter.

This rugged dual float switch is designed to be used primarily in residential, commercial and rental unit sump pump basins to alert the property owner of an excessively high water level before water spills out of the basin and onto the basement floor. Must be installed inside the basin above the normal water operating level, and can be quickly strapped to your sump pump discharge pipe.

The rugged sewage ejector pit switch is designed to be used primarily in residential, commercial, and rental unit sewage ejector pump basins to alert the property owner of an excessively high black water level before water spills out of the basin and onto the basement floor. 6' cable length that plugs into input #3 & #4 on the PumpAlarm Unit.
Sewage Float - Level Switch 7'

12V cellular alarm light with two inputs. The TextLight will send you alerts notifying you of power loss and high-water level. Equipped with a backup battery that runs for 12+ hours in the event of a power loss. Annual cellular subscription required - $75.00/year.

120V cellular alarm light paired with an air pressure switch that is designed to easily attach to your existing system.

120V cellular alarm unit paired with a current switch to indicate the presence or absence of operating current.