How it Works

Simplicity By Design

Text message alerts direct to your phone.
Helping solve life’s complex problems with a simple solution.

Buy Today
Property alarm with text message alerts. Power failure, high temperature, low temperature.

Simple By Design

Text message alerts direct to your phone. Helping solve life's complex problems with a simple solution.

How it Works 

It’s like installing Peace of Mind.

Text message power outage, low/high temperature and water alarm, property alarm system

Height: 6.7″ | Width: 4.9″ | Depth: 1.9″ | Weight: 1.1 lbs | Indoor Use Only

System Status Lights

Network: cellular connectivity

info: low battery notification (red) or temperature alert (green)

Capacitive Touch Buttons

Power/Mute: Hold to power the device on/off (receive notifications when power is turned off). Tap the button to Mute current alarms.

Test: Tap to send all programmed numbers a message, letting you know your device is working.

Programmable Inputs

Customize inputs by adding name / type, alarm delay (1-999 seconds), and setting Normally Open / Normally Closed.

Inputs 1 and 2 are individually wired; inputs 3,4 connect internally for our dual float switch or work with our sewage / tether float switch.

Cellular Radio

CDMA2000 dual band 800/1900 radio. Message up to 3 mobile devices. Accepts messages for easy programming / status testing.

Transmits SMS thru Verizon’s robust cellular network.

Sounder

Used as a backup to cellular notifications, it’s loud close, but can’t carry through multiple floors or thick walls. 2.9 kHz +/- 500 Hz, 100 dBA with wall power.

75 dBA (estimated) on backup batteries. dBa varies by distance from unit and number of obstructions.

How it Works 

Our Cellular Water Alarm works to prevent costly property damage. Gain peace of mind with text message alerts for high/low temperatures and power failure. Additional sensors can monitor for applications such as high water or water detection.

Loaded with Features

Our Sensors

Stop overflows at your sump, grinder, or septic system.

Float Switch

High or low water detection for sump pits, tanks, aquariums, etc.

Float Switch

Great for sump pumps, grinder pumps, septic systems and other heavy splash or dirty water applications. Wires can be run up to 30′ from Celluar Alarm Unit, unit must be mounted indoors.

  • Purchase this Accessory »
  • Installs without tools.
  • 15 or 30 ft. lead wire
  • Accurate digital reed switch technology.
  • Engineered specifically for use with the PumpAlarm.com Cellular Water Alarm.
Detects basement water and floods before damage occurs.

Water Detector

High sensitivity for floor applications such as drains and under appliances.

Water Detector

Great for floor drains, water heaters, under appliances and other water prone areas. Instantly detects water as low as 3/16″, or enough to create bridge between the metal contacts of the sensor.

  • Purchase this Accessory »
  • Installs without tools.
  • 15 ft. lead wire and connector attached to digital sensor.
  • Accurate digital conductivity technology.
  • Engineered specifically for use with the PumpAlarm.com Cellular Water Alarm.

Low Temp Sensor

45 deg F low temperature sensor. Perfect as a furnace failure detector.

Low Temp Sensor

With this add on sensor, our device will send text message notifications if ambient air temperature drops below 45°F. Prevent damage associated with furnace, boiler, or other heating system failure.

  • Purchase this Accessory »
  • Installs without tools.
  • 8 in. lead wire and connector attached to bimetal temp sensor.
  • +/- 3°F threshold.
  • Engineered specifically for use with the PumpAlarm.com Cellular Water Alarm.

Text Message Service

$4999/year
  • Piece of mind for less than $1 per week
  • No land line or internet connection necessary
  • Messages up to 3 numbers
  • No Contracts
  • Coverage Guarantee
Find us at BBB.org

Isn’t your property worth protecting?

Buy Today